The Great Plains Towers Fold Over Tilt Pole Tower Kits comes fully welded and assembled for rapid deployment. Maintenance, adjustments, and replacements of the items mounted on the tower/pole can be performed comfortably at a safe working ground level within minutes.
Preliminary Catalog Drawing Tower Design may change with County, State, and Antenna loading.
Description
Hinged poles Or Hinged Towers: - Capacities - Engineering Calcs
DT/MHP20/4 pole - Mid-hinged design. - 4" square mast - 20' tall - 20' mast. - 4' top pipe (optional) - lightning rod (optional) - ABBC-1 (29 lbs) (Optional)
Pole includes a 1,200 lb rated painted steel hand winch with a 20 foot long x ¼ inch diameter galvanized winch cable, single part.
Optional DTABBC-1 $194.42 (29 lbs) Four 3/4" x 48" all welded anchor base bolt cluster, 6" square pattern center to center on a face
Optional Stainless Steel Winch Upgrade (Additional cost) - $345.00:
DTSTST1200HW - 1200 pound rated hand operated automatic braking cable winch with 20 foot long x ¼ inch diameter stainless steel winch cable
Optional Top Pipe of your choosing:
DT/TOP4PIPEX2 - 4’ long x 2 3/8” OD top flanged pipe.
15 Ft/2 optimized EPA @ 80mph. 3' AGL elevated pole pier foundation design. 20' hinged pole suggested foundation design.
Click here to see the CAD drawing.
DT-MHP20-ft-4 - foundation drawing.
Pole / Tower Foundation Assembly
20’ x 4” Mid-hinged Pole has 12.6 square feet available surface area @ 93 mph
DT-MHP20-ft-4 @ 93 mph - Pole and Calcs.
20’ x 4” Mid-hinged Pole has 7.07 square feet available surface area @ 110 mph
DT-MHP20-ft-4 @110 mph - Pole and Calcs.
Pole includes a 1,800 lb rated painted steel hand winch with a 50 foot long x ¼ inch diameter galvanized winch cable, two parted.
Optional DTABBC-3 - $486.81 (95 lbs) Four 1 ¼” x 48” all welded anchor base bolt cluster, 12" square pattern center to center on a face.
Optional Stainless Steel Winch Upgrade (Additional cost) - $621.00:
DTSTST1800HW - 1800 pound rated hand operated automatic braking cable winch with 50 foot long x ¼ inch diameter stainless steel winch cable
21 Ft/2 optimized EPA @ 80mph. 3' AGL elevated pole pier foundation design. Click here to see the drawing.
Pole Hinge is 6' above ground. 26' Mid-Hinged pole drawing. Click here to see the drawing.
DT-MHP20-ft-6 - Foundation drawing.
20’ x 6” Mid-hinged Pole has 28.27 square feet available surface area @ 101 mph
DT-MHP20-ft-6 @ 101 mph - Pole and Calcs.
20’ x 6” Mid-hinged Pole has 26.71 square feet available surface area @ 110 mph
DT-MHP20-ft-6 @ 110 mph - Pole and Calcs.
DT/MHP30/4 (pole) - Mid Hinged design - 30' tall - 4" square mast - 4' top pipe (optional) - lightning rod (optional) - ABBC-2 (53 lbs) (Optional)
Pole includes a 1,800 lb rated painted steel hand winch with a 20 foot long x ¼ inch diameter galvanized winch cable, single part.
Optional DTABBC-2 $263.52 (53 lbs) Four 1" x 48" all welded anchor base bolt cluster, 9" square pattern center to center on a face
DTSTST1800HW - 1800 pound rated hand operated automatic braking cable winch with 20 foot long x ¼ inch diameter stainless steel winch cable
15 Ft/2 optimized EPA @ 80mph. 34 ft MHP foundation install detail Click here to see the drawing.
DT-MHP30-ft-4 - foundation drawing.
34 ft HingedPole PE Engineering w Foundations. Structural Analysis PE drawing.
DT/MHP30/6 (pole) - Mid-hinged design - 30' tall - 6" square mast - 4' top pipe (optional) - lightning rod (optional) - ABBC-3 (95 lbs) (Optional)
Optional DTABBC-3 - $486.81 (95 lbs) Four 1 ¼” x 48” all welded anchor base bolt cluster, 12" square pattern center to center on a face
15 Ft/2 optimized EPA @ 80mph. AKA 120mph with no attached load 34' aka 10M heavy duty mid hinged pole by GPTowers.
Click here to see the drawing.
DT-MHP30-ft-6 - foundation drawing.
Structural Analysis Report.
PE - Stamped Engineering Drawing
PE - Stamped Ballast Foundation Calcs
PE - Stamped Structural Analysis Report
PE - Stamped Weld County Co - Cover page-Foundation Calcs-Structural Analysis
DT/MHP40/6 (pole) - Mid-Hinged design - 40' pole - 6" square mast - 4' top pipe (optional) - lightning rod (optional) - ABBC-3 (95 lbs) (Optional)
13 Ft/2 optimized EPA @ 80mph
CAD drawing.
DT-MHP40-ft-6 - foundation drawing.
Engineering calculations 1
Engineering calculations 2
DT/MHP55/8 (pole) - Mid-hinged design - 55' tall - 8" square mast.
Pole includes a 2,600 lb rated painted steel hand winch with a 50 foot long x 5/16 inch diameter galvanized winch cable, two parted.
Optional DTABBC- 6 - $1,041.57 Eight 1 ¼” x 48” with 24 nuts, all welded anchor base bolt cluster, 16-7/8" square pattern center to center on a face
Optional Stainless Steel Winch Upgrade (Additional cost) - $690.00:
DTSTST2600HW - 2,600 pound rated hand operated automatic braking cable winch with 50 foot long x 5/16 inch diameter stainless steel winch cable
5.5 Ft/2 optimized EPA @ 80mph. 55' mid-hinged pole.
Click here to see the 55’ hinged pole CAD drawing
DT-MHP55-ft-8 - foundation drawing.
Click here to see the PE Stamped Foundation drawing.
Click here to see the Structural Analysis PE drawing.
24' tall mid hinged pole w 4" square mast
All Dakota Towers products are backed by a 2-year product workmanship warranty to the purchaser from the date of sale.
Contact us with any questions - info@greatplainstowers.com
We would be happy to answer your questions and set up a meeting with you.