800 853 2236      lens   


Cart Summary
Engineered Products
Previous 1 2 3 Next 
Interface Plate

The Great Plains Towers ballast tray Interface Plate is hot-dip galvanized and comes pre-drilled an ready to use based on your tower selection. The plates will be delivered drilled based on your tower or pole selection. The square Interface Plate comes in 24", 32", 38", 44", or  48" square plates.

Direct Embedment Sections

The Great Plains Towers Direct Embedment Section (DES) is a simple one piece component which has cost savings benefits.

The DES is by far the most commonly utilized design with the biggest advantage for installing our Dakota SS tower foundation over installing 12 anchor base bolts.

Place the DES (Direct Embedment Section) into the excavated hole along with the rebar & fill the excavation with concrete while following our pre-engineered self-supporting foundation drawing is quick & simple.  

T-Frame Sector Antenna Mounts

Our T-Frame Antenna Sector Frame Mounts are fully welded with no assembly required which facilitates fast installations. Individual antenna mounting pipes are not included in the above listed pricing which are ordered separately. Contact us for your specific dimension pipes & pricing.

Click to download PDF CAD 3D Sector Mount Drawing

Click to download PDF Engineering Sector Mount Drawing

Options for Fold-Over Poles & Towers

Rapid Deployment Hinged Articulating Towers & Poles support applications: CCTV cameras for security, production activity, deterrent, warehouse stock, personal protection. Lighting in parking lots, schools, rest areas, streets, airports, ski slopes, playgrounds, swimming pools. RWIS, Broadcast, PTC, SCADA, WISP, microwave, LACT’s, PODs, Cellular. Rooftop & ground mounted mounted heliport wind direction socks & assoc equipment. Roadside RWIS Meteorological (MET) instruments, environmental weather research stations. Wind turbine generator support structure. Flags, banners & signage displays. Solar photovoltaic (PV) panels. Civil Defense warning sirens & public address speakers. Traffic control signals, warning & flashing lights. Aircraft rotating beacon warning lights, obstruction lighting, runway lighting. Lightning dissipation & attraction. Scientific research test monitoring stations, devices & instruments

Tower Stand-Off Mounting Brackets
Tower Standoff Bracket Mounts

Our Tower Standoff Bracket Mounts are fully welded with no assembly required which facilitates fast installations. All clamp sets are not included in the listed pricing which are ordered separately.

Contact us for clamp set pricing.

Click to download the 2 - 3 - 4 ft Tower Standoff Bracket Mount Drawing

Telescoping Tower Mast "Pole Only" - Clearance (limited qty)

4 stage telescoping masts provides an easy and effective way to quickly raise antennas, lights, MET instruments, cameras and equipment. Antenna loading capacity estimates: 6 sq ft surface area @ full height, 11 sq ft surface area at 75% height, 26 sq ft surface area @ 25% height, 38 sq ft retracted, all at max 15 mph wind. Use 4 guy wires during winds at & above 15 mph with capacity sq ft surface area mast loading.

Reference Half-Cell

OPTIONAL - Reference Half-Cell  DT-CPS-RC - $386.10

Click to view drawing

Test Head

OPTIONAL - Test Head  DT-CPS-TH - $117.00

Click to view drawing

Anchor Shaft Corrosion Protection Systems

To protect your guyed tower, we recommend an anchor shaft excavation inspection for all guyed towers which are more than a few years old if they have not had a corrosion protection system. (CPS). Since 99% of anchor shaft corrosion & shaft failures normally occurs in the lowest 1′ of the anchor shaft, it is prudent to carefully excavate & inspect the entire length of each anchor shaft. Installing our high quality Cathodic Protection System (CPS) ensures the safety, security & life expectancy to your guy wire tower structures. Our cathodic protection systems have proven they can last over 30 years when used in conjunction with a resilient anchor shaft protective coating.

Previous 1 2 3 Next 
How Can We Help You?

Contact us with any questions - info@greatplainstowers.com 

We would be happy to answer your questions and set up a meeting with you.

 Great Plains Towers
                  126 Sixth Street West
                  West Fargo, North Dakota 58078
701 282 2236 ,  800 853 2236
Enter your name
Enter email address
Enter Phone number
Enter your message